Loading ...
Loading ...
Loading ...
5ENGLISH
Polarization instructions
1. To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other)
and will require the use of a polar-
ized extension cord. The appliance
plug will t into a polarized exten-
sion cord only one way. If the plug
does not t fully into the extension
cord, reverse the plug. If the plug
still does not t, obtain a correct
polarized extension cord. A polar-
ized extension cord will require
the use of a polarized wall outlet.
This plug will t into the polarized
wall outlet only one way. If the
plug does not t fully into the wall
outlet, reverse the plug. If the plug
still does not t, contact a qualied
electrician to install the proper wall
outlet. Do not change the equipment
plug, extension cord receptacle, or
extension cord plug in any way.
2. Warning – To reduce the risk of per-
sonal injury due to a loose electrical
connection between the appliance’s
plug and extension cord, rmly and
fully attach the appliance plug to the
extension cord. Periodically check
the connection while operating to
ensure it is fully attached. Do not
use an extension cord that provides
a loose connection. A loose connec-
tion may result in overheating, re,
and increases the risk of a burning.
3. To reduce the risk of disconnec-
tion of the appliance cord from the
extension cord during operating,
make a knot as shown in the Figure.
12
► 1. Cord set 2. Appliance cord
4. Maintain Appliance With Care –
Inspect extension cords periodically
and replace if damaged.
Extension cord
USE PROPER EXTENSION CORD. Make
sure your extension cord is in good con-
dition. When using an extension cord, be
sure to use one heavy enough to carry the
current your product will draw. An under-
sized cord will cause a drop in line voltage
resulting in loss of power and overheat-
ing. Table 1 shows the correct size to use
depending on cord length and nameplate
ampere rating. If in doubt, use the next
heavier gage. The smaller the gage num-
ber, the heavier the cord.
Table 1: Minimum gage for cord
Ampere Rating Volts Total length of cord in feet
120V 25 ft. 50 ft. 100 ft. 150 ft.
220V - 240V 50 ft. 100 ft. 200 ft. 300 ft.
More Than Not More Than AWG
0 A 6 A –18 16 16 14
6 A 10 A 18 16 14 12
10 A 12 A 16 16 14 12
12 A 16 A 14 12 Not Recommended
SAVE THESE
INSTRUCTIONS.
This appliance is intended for commer-
cial use.
Loading ...
Loading ...
Loading ...