Loading ...
Loading ...
Loading ...
Westinghouse Outdoor Power Equipment | 9
INSTALLATION
3. Run the exhaust duct outdoors.
4. If using a window vent, install it following the instructions
below.
INSTALL THE WINDOW VENT KIT
Part no: 600005064431
INCLUDED PARTS
Adjustment panel
Window panel
Exhaust cover
Extension panel
Screen
Rain guard
Fixed base
Fixed clip
Mounting plate
Bracket (1)
Screw (1)
Foam seal A
Foam seal B
(adhesive type)
SUGGESTED TOOLS
• Screwdriver (medium size Phillips)
• Tape measure or ruler
• Knife or scissors
• Saw (In the event that the window panel needs to be
cut down in size because the window is too narrow for
direct installation.)
INSTALL WINDOW PANEL
1. Open the window and measure the width or height
inside the window frame. Cut the foam seal B to the
proper length and attach it to your horizontal (or vertical)
sliding window.
Foam seal B
(adhesive type)
Foam seal B
(adhesive type)
Width
Height
2. Attach the screen to the back side of the window panel.
Push the screen securely into the window panel to
ensure that is rmly installed.
3. Insert the exhaust cover to the window panel.
Insert the first groove
Loading ...
Loading ...
Loading ...