Loading ...
Loading ...
Loading ...
6 www.SereneLifeHome.com
THE PADDLE
Your board paddle comes in three pieces. To build the paddle,
hold the button in while sliding the pieces together until
they click into place. The last section (top) of the paddle is
adjustable. To nd the ideal height for your paddle, start by
building the paddle so it is 6 inches taller than your own
height. From this point, adjust the top section up or down
until the length is comfortable for you. A longer paddle is
better suited for a smooth, easier paddling motion.
A shorter paddle is good for performance or competition
riding.
REPAIR KIT
If your board needs repair, use the patches in the repair
kit and follow these steps:
1. Deate the board completely, lay it at and wait for it to
dry.
2. Cut a patch that is 2 inches larger than the tear/rip all the
way around.
3. Use alcohol to clean the repair area.
4. Apply three coats of adhesive to the patch and the board.
Wait 5 minutes in between each coat.
5. Place the patch over the tear/rip. The adhesive will react
quickly, so make sure the positioning is precise/accurate.
Use the roller to ensure the patch lies at and even.
6. Wait 24 hours before re-inating the board.
STORAGE
Having an inatable SUP board makes portability and
storage very easy. Here are some simple suggestions if
you plan on traveling with your SUP board.
• Avoid storing your SUP board in direct sunlight.
• If you have to store your board inated between uses,
attach your pump to make sure the board is carrying the
correct air pressure.
• Do not roll up the board too tight when storing it while
deated.
• If ns become bent, place them in boiling water and use
heat (e.g. hairdryer) to bend them back into position.
Loading ...
Loading ...