Loading ...
Loading ...
Loading ...
- 2 -
1. Use
Screw design, adjusting the height by rotating the screw manually, it is an
ideal second lifting tool for tire changing and maintenance on your
motorcycle.
2. Operation
a. Rotate the screw by ratchet wrench to adjust the height of the platform.
b. 2. Adjust the platform to the appropriate height and place the lift to the
bottom of the motorcycle. Make sure that the center of the load align
with the pivot, and keep the load stable and safe.
c. 3. When all this is done, lift the motorcycle to the proper height and
insert the safety pin.
d. 4. Tighten the motorcycle with other tools to keep it stable.
e. 5. After repairing, pull out the safety pin, rotate the ratchet wrench
slowly and gently to lower the platform until it departs from pivot, and
then take the lift away.
3. Warning and maintenance
a. Read and understand the user manual before assembling, installing,
operating, or servicing this product. Failure to follow these warnings
and instructions can cause death, personal injury or damage to
valuable property. And Keep the user manual .
b. Do not overload the Engine Stand. Never exceed the maximum weight
capacity of 1100 Lbs.
c. The lift must be used on a solid and level surface, not allowing gradient
and uneven surface.
d. Keep the load stable and prevent the load from losing balance.
e. Before using, lubricate the screw and the nuts with grease to make the
lift flexible and antifriction.
f. Keep children and unauthorized persons away from the work area.
g. Wear ANSI approved safety goggles when operating the lift.
h. Only use this lift on a big , stable ,level, dry and not slippery motorcycle
lift platform. Keep the surface clean,tidy and free from unrelated
materials and ensure that there is adequate lighting.
Loading ...
Loading ...
Loading ...