Tripp Lite 5PX3000HRTNG2 Eaton 5PX G2 3000VA 3000W 208V Line-Interactive UPS - 2 C19, 8 C13 Outlets, Cybersecure Network Card Included, Extended Run, 2U Rack/Tower

User Guide - Page 5

For 5PX3000HRTNG2. Also, The document are for others Tripp Lite models: 5PX1500HRTG2, 5PX2200HRTG2, 5PX3000HRTG2, 5PXEBM48RTG2, 5PXEBM72RTG2

PDF File Manual, 41 pages, Read Online | Download pdf file

5PX3000HRTNG2 photo
Loading ...
Loading ...
Loading ...
614-40096-00
5
1 Introduction
Thank you for selecting an Eaton 5PXproduct to protect your electrical equipment.
TheEaton 5PXrange has been designed with the utmost care. We recommend that you take the time to read this
advanced user guide to take full advantage of the many features of your UPS (Uninterruptible Power System).
Before installing yourEaton5PX,please read the information and safety instructions provided. Follow the instructions in
the quick start guide and if necessary, refer to this advance user guide.
To discover the entire range ofEatonproducts, we invite you to visit ourweb siteateaton.comor
contactyourEatonlocal representative.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
UPS employing batteries with min. V-2 case are intended for use in computer room as defined in the standard for the
Protection of Information Technology Equipment, ANSI/NFPA 75.
UPS employing batteries with HB case are intended not for use in a computer room as defined in the standard for the
Protection of Information Technology Equipment, ANSI/NFPA 75.
Supplier's Declaration of Conformity of Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
For questions regarding this FCC SDoC declaration, contact Eaton Corporation by telephone or through the Internet.
Eaton Corporation
8609 Six Forks Road,
Raleigh, NC 27615, USA
Telephone: 800-356-5794
This UPS can be used in IT power system. This UPS complies with the IP20 protection type.
1.1 Environmental protection
Eatonhas implemented an environmental-protection policy. Products are developed according to an eco-design
approach.
Substances
This product does not contain CFC and HCFC. This product does not contain asbestos. This product is compliant with
regulations on the restriction of the use of substances in electrical and electronic equipment.
Packaging
To improve waste treatment and facilitate recycling, separate the various packing components.
The cardboard we use comprises over 50% of recycled cardboard.
Plastic bags are made of polyethylene.
Packing materials are recyclable and bear the appropriate identification symbol.
Loading ...
Loading ...
Loading ...