Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
STEP 5 mTO OPERATE
ON FAN ONLY:
DO THIS:
PRESSON
(if not running)
PRESS
FANONLY
ONE
YOU WILL SEE:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to
open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan
speed you prefer. (Note: The "AUTO" setting will not operate in FAN ONLY.)
During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode.
STEP 6 mTO USE THE ENERGY
SAVER FEATURE: YOU WILL SEE:
DO THIS:
PRESS
ENERGYSAVER
Note: In this mode, when the compressor shuts off, the fan will continue to run for another 3 minutes, then shut off until
cooling is needed, as sensed bythe room temperature control. During this time, it may come on for 3 minutes to sense whether
cooling isneeded, then it will go off for 15 minutes. It will continue doing this to sample the room air for as long as necessary.
STEP 7 _TO SET FOR
DELAYED START: YOU WILL SEE:
DO THIS:
PRESSOFF
(If unit is running)
PRESSTIMER/OFF
Note: To do this, the unit must be in the off position.
When first set, the display will show .5 (one half hour), to increase the time up to 24 hours, go to step 8.
8
Loading ...
Loading ...
Loading ...