Loading ...
Loading ...
Loading ...
13
Figure 1
Motor
Assembly
2. Assemble the switch housing assembly to the
adaptor plate of the motor assembly using the two
key slots in the switch housing assembly. Replace
the third screw and secure all three screws.
(Figure 2)
3. Remove one of the three screws in the switch
housing assembly. Retain the screw for later and
slightly loosen the remaining two screws. (Figure 3)
4. For use with light kit
Securely attach 9-pin connector from motor assembly
to wiring harness socket within light kit assembly.
(Figure 4)
How to Assemble Your Light Kit or Cap
1. Remove one of the three screws in the support
bracket at the bottom of the motor assembly. Retain
the screw for later and slightly loosen the remaining
two screws. (Figure 1)
Figure 2
Motor Assembly
Switch Housing
Assembly
Figure 3
Figure 4
Switch Housing
Assembly
WARNING
The color label on these two connectors must
correspond to each other.
Motor Assembly
Light Kit
Assembly
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
Figure 5
Switch Housing
Assembly
Light Kit
Assembly
5. Assemble the light kit assembly to the switch
housing assembly using the two key slots in the light
kit assembly. Replace the third screw and secure
all three screws. (Figure 5)
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
Loading ...
Loading ...
Loading ...