Loading ...
Loading ...
TOOLUSEAND CARE
• Store idle tools out of reach of children
and other untrained persons. Tools are
dangerous in the hands of untrained
users.
• Maintain tools with care. Properly
maintained tools are less likely to bind
and are easier to control.
• Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
tool's operation. If damaged, have the
tool serviced before using. Many
accidents are caused by poorly
maintained tools.
Before you begin, make sure your car is
• Use only accessories that are
recommended by the manufacturer for
your model. Accessories that may be
suitable for one tool may create a risk of
injury when used on another tool.
SERVICE
• Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel may result in a risk of injury.
• When servicing a tool, use only identical
replacement parts. Follow instructions in
the maintenance section of this manual.
Use of unauthorized parts or failure to
follow maintenance instructions may
create a risk of electric shock or injury.
clean and dry. The work area should be
dry also. If necessary, remove road tar
with a general cleaner before polishing.
Also, remove excess grease spots, bug
stains, etc.
NOTE: The Wax & Polishing Solution
containers shown in the illustrations are
representative. Yours may look different.
A
Place the blue wax applicator bonnet on
pad as shown. Make sure the elastic is
tucked down securely and evenly around
the underside of the pad.
C FOR LIQUID WAX
Apply three swirls of liquid wax on the wax
applicator bonnet. DO NOT APPLY WAX
DIRECTLY TO CAR. This first application
should do about 1/4 of the car. For the
second and third applications of wax, use
half the quantity stated above. The bonnet
will not absorb as much when reloading.
B FOR PASTE WAX
Spread about a heaping teaspoonful of wax
evenly over the entire surface of the wax
applicator bonnet. Use a putty knife or any
flat object. DO NOT APPLY WAX DIRECTLY
TO CAR. _
D
The polisher is turned on and off by
squeezing and releasing the trigger
switch. The LOCK button on the trigger
switch can be used to lock the machine in
ON position while it is running. To lock,
depress the LOCK button as you release
the trigger switch. To release LOCK, press
the trigger switch.
Lockbutton,
3
Loading ...
Loading ...
Loading ...