Loading ...
Loading ...
Loading ...
8
1
Drive Control Lever
10
Auger Blade
2
Drive Speed/Gear Control
11
Skid Shoe
3
Chute Deflector Control
12
Tire
4
Auger Control Lever
13
Belt Cover
5
Chute Rotation Handle
14
Electric Start Button
6
Clean Out Tool
15
Lower Handle
7
Discharge Chute Deflector
16
Recoil Start Handle
8
Discharge Chute
17
Handle Nut
9
Auger Housing
18
Oil Dipstick
19
Light
(PSSW26LED/PSS2260LED/PSSHD26-
LED only)
20
21 22 23
20
Fuel Tank Cap
22
Switch Key
21
Primer Bulb
23
Choke Lever
Drive Control Lever
Located on the right side of the upper handle, the Drive Control Handle is used to engage and
disengage the drive wheels. Squeeze the Drive Control Handle against the upper handle to engage the
wheels; release to disengage.
Drive Speed/Gear Control
The Speed/Gear Control is located on the center of the panel and is used to set the drive speed and
direction of travel. It can be moved into any of eight positions (six forward and two reverse gear
settings)
Auger Control Lever
Located on the left side of the upper handle, the Auger Control Handle is used to engage and
disengage the augers. Squeeze the Auger Control Handle to engage the augers; release to disengage
the augers.
Chute Rotation Handle
To adjust snow discharge direction, rotate the handle clockwise or counter-clockwise…. should
rotate 180 degrees.
Skid Shoe
Position the shoes based on the surface conditions. Adjust upward for hard-packed snow. Adjust
downward when operating on gravel or crushed rock surfaces.
Loading ...
Loading ...
Loading ...