1
Operation Guide 5577
MA1911-EB
© 2018 CASIO COMPUTER CO., LTD.
• Your watch may differ somewhat from the one shown in
the illustration.
• The actual positions of the crown and button depend on your watch model, and may
be different from those shown in the nearby illustration.
Crown
Crown Operations
Crown
Loosen
Some water-resistant models (100meters, 200meters) have a
screw-in crown. When you need to perform a crown operation,
rotate it counterclockwise to unscrew it. Then pull the crown
out. Avoid applying undue force when pulling. The watch
loses its water resistance while the crown is unscrewed. After
performing a crown operation, fully screw the crown back in.
If your watch has a rotary bezel...
Start
Elapsed time
Current
You can rotate the bezel to align its
▼
mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the
▼
mark.
Rotate the Crown to change the time setting.
To adjust the time setting
When the second hand is at 12o’clock, pull
out the
Crown to stop it.
Push the Crown back in on a time signal to
resume timekeeping.
Note
• When changing the time,
move the minute hand four
or five minutes past your
final setting, and then back
it up to the setting you want.
Specifications
Accuracy at normal temperature: ±20 seconds a month
Illumination: LED (light-emitting diode)
Battery: One silver oxide battery (Type: SR626SW) and one lithium battery (Type: CR1616)
Battery Life: Approximately 3 years on type SR626SW and type CR1616 (assuming one
9-second illumination operation per day)
• Always have both batteries replaced at the same time.
Specifications are subject to change without notice.
Illumination Precautions
• Illumination may be hard to see when viewed under direct sunlight.
• Frequent use of illumination runs down the battery.
To turn on illumination
Note
• Illumination remains turned on as long as L is depressed.
• Illumination will turn off about four seconds after L is released.
Hold down L.
