Loading ...
Loading ...
Loading ...
34/
EN
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to move to the L:
position on the display. Interior lighting
is off in “L:0” position and on in “L:1”
position. Select the position you want
with the Time Delay key.
3. Switch off the machine with the On/Off
key to save the changes.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Self Cleaning Filter
(depends on the model)
With this function, your micro filter will be
cleaned by a special system at the end of
washing cycle and it is made ready for use
for the next usage of the machine. This
cleaning process increases the cleaning
period of the micro filter from 2 weeks to
3 months and thus boosts the washing
performance. Employing this function in
every washing cycle is recommended in
order to get the most out of it.
Auto Door Opening
(Depends on the Model)
Thanks to the “Auto Door Opening” feature
on your machine, the drying effectiveness
of your machine is improved and power
is saved. There are two options, namely
“OFF” and “ON”.
You may use sub-menu settings to change
“Auto Door Opening” settings.
When you activate this function, the door
of your machine is opened automatically at
the end of the washing cycle.
Auto Door Opening feature opens the
door at the end of the washing cycle
thanks to the “door opening shafts".
This process takes about 2 minutes.
Do not force to close the door if the
power is interrupted while the shafts
are moving out. Operation shall be
completed and shafts shall be retracted
when the power is restored.
Auto Door Opening function may
cause changes to the cycle time.
Changing Auto Door Opening
Settings
1. Press the Delay and P/P+ key
simultaneously after turning on your
machine. Keep pressing until the
countdown on the screen displayed as
3, 2, 1 is completed.
2. Press P / P+ key, and move to the o:
position on the screen. “o: 0” position
indicates that the Auto Door Opening
feature is off “o: 1” position indicates
that it is on. Select the desired position
with the delay key.
3. Turn off your machine with the On/Off
key to save the setting.
Loading ...
Loading ...
Loading ...