Loading ...
Loading ...
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND SAVE
THESE IMPORTANT SAFETY
INSTRUCTIONS
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
USE ONLY WITH LISTED/CERTIFIED USB
POWER SOURCES AND CABLES.
When using electrical appliances, basic safety precautions
should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the instruction
manual.
3. To reduce the risk of electrical shock do not immerse
unit, plug or cord in water or other liquids.
4. Close supervision is necessary when any appliance is
used near children.
5. Unplug from USB outlet when not in use, when moving
fan from one location to another, before cleaning. To
disconnect, grip plug and pull from USB outlet.
6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or
flammable fumes.
8. To avoid risk of fire, NEVER place the cord under rugs
or any parts near an open flame, cooking or other
heating appliance.
9. Do not operate any appliance with a damaged cord
or plug after the appliance malfunctions, or has been
dropped/damaged in any manner. Discard fan or
contact customer service.
10. Do not run cord under carpeting. Do not cover cord
with throw rugs, runner, or similar coverings. Do not
route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be
tripped over.
11. WARNING: To reduce the risk of fire, electric shock,
or injury to persons, do not use replacement parts or
attachments not recommended by the manufacturer
(e.g. parts made at home using a 3D printer).
12. Do not let the cord hang over the edge of a table,
counter or come in contact with hot surfaces, including
the stove.
13. Do not use outdoors or for commercial use.
14. Always use on a dry, level surface.
FEATURES - OPERATIONS FEATURES - OPERATIONS
Figure 2
USING THIS FAN
This fan comes with a rechargeable battery that can last up to six hours on LOW setting.
This fan also comes with (1) 3.9 ft Type C USB Power Cord (for power and charging only). The USB cord can be used as a
power source to run the fan and/or to recharge the fan.
CHARGING THE INTERNAL BATTERY
Before use, ensure that the internal rechargeable battery is fully charged as follows:
Use a Type C USB Power Cord to connect the fan to a DC5V power supply. The red light will turn on when the fan is
charging. Once the battery is fully charged, the green light will turn on and the Type C USB Power Cord can be removed.
TILT ADJUSTMENT INSTRUCTIONS
To adjust the tilt angle, move the fan head to the desired angle. The fan head can be manually rotated 360
degrees vertically (up and down) and horizontally (left and right).
THIS FAN CONTAINS A LITHIUM-ION BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED PROPERLY. CHECK LOCAL
AUTHORITY REGULATIONS. NEVER INCINERATE OR DISPOSE BATTERIES INTO A FIRE.
OPERATING INSTRUCTIONS
1. Clip the fan or rest on a dry, solid surface.
2. Press the Power Button to turn the fan on or off.
3. When the fan is off, press the Power Button to turn on the fan on to the highest speed. The Speed Indicator Lights will
display three white lights. Press the Speed Button once to select the mid speed. The Speed Indicator will display two white
lights. Press the Speed Button a second time to select the lowest speed. The Speed Indicator will display one white light.
Press the Speed Button a third time to return to the highest speed.
WALL MOUNTING INSTRUCTIONS
This personal clip fan can be wall mounted by using the following instructions.
Step 1: Select a suitable location on the wall
Step 2: Mark the correct place where the screw will be inserted. Consult with a Hardware or Home Center Professional
for the best screws for your type of wall.
Step 3: Secure the screw almost all the way into the wall using a screwdriver.
Step 4: Line up the hole on the back of the fan with the screw. Make sure the screw is secured into the
wall before carefully placing the fan on it. Once the hole in the back of the fan is overtop of the screw, gently
push the fan downward to secure in place.
Figure 1
Front Grill
Clip
Charging light
Speed
Indicator
Lights
Rubber Pad
Fan Blade
Power Button
Tilt adjustable
Left & right
adjustable
Speed Button
Rear Grill
Hook hole
1 x Type C USB Power Cord
(For power and charging only)
Type C
USB-A
Type C USB Port
15. WARNING: To reduce the risk of electrical shock and
injury to persons, do not use in window.
16. WARNING: To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device.
17. Use only with a 5 volt USB port, adapter or power
supply.
18. Use battery operated fan only with specifically
designated battery type 18650, 3.7V, 2200mAh,
8.14Wh. Use of any other batteries may create a risk
of fire.
19. Do not incinerate this fan even if it is severely
damaged. The batteries can explode in a fire. Never
incinerate or dispose batteries into a fire.
WARNING: To reduce the risk of fire, electric shock,
or injury to persons, do not use replacement parts that
have not been recommended by the manufacturer
(e.g. parts made at home using a 3D printer).
Loading ...
Loading ...
Loading ...