Loading ...
Loading ...
Loading ...
Operating Tips ....... ................................................
Starting The Dishwasher Adding a Forgotten Item
I1
Et
After loading the dishwasher and adding detergent,
set the control knob to the desired cycle and press
the appropriate option button(s).
Run the water from the hot water tap to clear the
line of cold water before starting. Connect convert-
ible models to the faucet (See below).
[] Press the door until it latches. The cycle wild begin
with a drain prior to fill.
For best cleaning, the forgotten item should be added
early in the cycle.
Unlatch the door.
B Wait for the water circulation to stop.
Open the door and add the item.
t_ Close and latch the door.
D The cycle resumes automatically.
Note Water heating and dry options can be used separately or together. ]
Delay Start glows when this option is selected The
light stays on until the start of the cycle.
On (certain models) glows when any cycle on the con-
trol knob (including delay start and dry) is on. This light
will go off when the control knob reaches OFF.
Clean (certain models) glows at the end of the dr)
cycle and remains lit until the control knob has beer
manually advanced to OFF.
_:_Heating Delay glows to indicate that the cycle i_,
being extended to heat water to the proper temperature
The location of the _ symbol around the knob corre-
sponds to the heating delay portions of the cycle.
6ooeaooogeeoooeeeooeoeeoeeooeeeeOeeoeeeeoee6e6oaoooo
Connecting a Convertible
I1
B
m
[]
Turn on the faucet at the sink until hot water comes
out. Turn off the faucet.
Pull the connector from the recess in the back of the
dishwasher as shown.
Press down on the thumb release and lift the con-
nector onto the faucet,
Remove pressure from the thumb release and tug
slightly on the connector to be sure it is securely in
place.
Turn the hot water on full force.
El
D Check that the sink drain is open so water from the
dishwasher can drain properly.
Pull the electrical cord from the recess. Plug it into
a properly grounded outlet,
Select the proper cycle for the load and start the
dishwasher.
Release
Button ...... Connector
9
Loading ...
Loading ...
Loading ...