Loading ...
Loading ...
Loading ...
7
address, see the user’s manual.
Step 1 Start ConfigTool, and then click
Modify IP
on the homepage.
Step 2 Select the device(s) whose IP need(s) to be changed.
●
Change one IP address: Click corresponding to the device.
●
Change IP addresses in batches: Select the devices, and then click
Modify IP
.
Step 3 Set mode, IP, subnet mask and gateway.
Step 4 Click
OK
.
Figure 3-2 Change IP addresses in batches
3.3 Login
You can log in to the web client by following the steps below. For first-time login or logging in after
restoring factory default settings, see "3.1 Initialization".
Step 1 Enter the IP address of the Camera in the browser address bar, and then press Enter.
Step 2 Enter your login username and password, and then click
Login
.
Step 3 For first-time login, click
Please click here to download and install the plug-in
, and then
install the plug-in according to system prompt.
Before installing the plug-in, make sure that
ActiveX controls
(in IE browser) from
Tools
>
Internet Options
>
Security
>
Custom Level
is enabled.
Step 4 After successfully installing the plug-in, the live view of the Camera is displayed.
3.4 Parking Space Configuration
The Camera can detect whether the parking space is occupied, count available spaces in an area and
monitor events such as crossing lines while parking.
3.4.1 Detecting Parking Space
Set a parking zone and parking spaces inside the zone, so the Camera can detect whether the
specified parking space is occupied and recognize the vehicle.
Step 1 Select
Setting
>
ITC
>
Park Space Config
>
Parking Space Management
.
Step 2 Under
Intelligence
, set
Mode
to
Parking Space Detection
.
Loading ...
Loading ...
Loading ...