Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed
PROBLEM CAUSE
to Sears service center
CORRECTION
8 Mower drive belt worn.
9 Blades improperly installed.
10 improper blades used.
8 Replace mower drive belt.
9 Reinstall blades sharp edge down.
10 Replace with blades listed in
this manual.
11 Clogged mower deck vent holes 11 Clean around mandrels to
from buildup of grass, leaves, and open vent holes.
trash around mandrels.
Headlight(s) not 1 Light switch is "OFF". 1 Turn light switch "ON".
"-- --[IteqW'erkinguipped)so 2 Bulb(s)or lamp(s)burned out. 2 Replace bulb(s)or lamp(s).
3 Faulty light switch. 3 Check/replace light switch.
4 Loose or damaged wiring. 4 Check wiring and connections.
5 Blown fuse. 5 Replace fuse.
Battery will not 1 Bad battery cell(s). 1 Replace battery.
L--
charge 2 Poor cable connections. 2 Check/clean all connections.
3 Faulty regulator (if so equipped). 3 Replace regulator.
4 Faulty alternator. 4 Replace alternator.
Loss of drive 1 Freewheel control in "disengaged" 1 Place freewheel control in
position. "engaged" position.
2 Motion drive belt worn, damaged, 2 Replace motion drive belt.
or broken.
3Air trapped in transmission 3 Purge transmission.
during shipment or servicing.
Engine "backfires" 1 Engine throttle control not sel 1 Move throttlecontrol between
when turning between half and full speed (fast) half and full speed (fast) position
engine "OFF" position before stopping engine, before stopping engine.
Engine dies when
tractor is shifted
into reverse
1 Reverse operation system (ROS)
is not "ON" while mower or other
attachment is engaged.
1 Turn ignition key to ROS "ON"
position. See Operation section.
NEED HORE HELP?
Youq_ find thc_ answer sad more or_ managemyhOmeoCOm - fez _free!
o Find this and a[[ your other product manua[s on[ind.
o Get answers from our team of home experts.
33
Loading ...
Loading ...
Loading ...