Loading ...
Loading ...
Loading ...
7
EN
Use
3.2 How to use the bottle
(Fig. B1-C1-D1)
• Place the ingredients into the bottle (1),
taking care not to exceed the maximum
capacity (600ml) (Fig. B1).
Let hot liquids cool down to room
temperature before pouring them
into the bottle.
For best results, we recommend
that you:
- add the hard ingredients first,
then the soft ones and then the
liquids;
- make sure that the maximum
size of the hard ingredients is
1cm x 1cm;
- the liquid part should be at least
50% of the solid part;
- only add a maximum of 4 ice
cubes (approximately 15g
each) in combination with liquid
ingredients. DO NOT add them
to dry ingredients.
• Secure the blade support (2) to the bottle
by turning it clockwise. Make sure that it
is fastened tightly (Fig. B1).
Warning
• Take great care, as the blades
and inserts are sharp.
• Place the base of the blender on a flat
horizontal surface. Plug it into the power
outlet.
• Turn the bottle over (1) and rest it on the
motor base (4) (Fig. C1).
• Use the control knob (3) to select the
required speed, 1 or 2 according to the
result you wish to obtain (Fig. C1).
• Gently press the bottle (1) downwards in
order to start the appliance. The LED ring
will remain on steadily until the bottle is
released (Fig. C1).
• To stop the blender, release the bottle (1).
The product stops and the LED turns off.
The blender will not work if the
bottle is not positioned correctly.
Warning
• Do not shake the bottle during
operation.
Important
• The blender can be used for up
to 60 seconds at a time. Wait
for 60 seconds before using it
again.
Warning
• If the motor stalls, turn off the
blender immediately, unplug
it from the power outlet and
allow it cool down for at least
10 minutes.
Loading ...
Loading ...
Loading ...