Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
TO CHANGE TEMPERATURE DISPLAY, =
temp/timer auto
hi mmed
lo ]
VON-OFF A FANSPEED
fitter
reset
sleep
YOU WILL SEE:
temp/timer
auto 1
hi = fi[termed
/o reset
V ON-OFF A FAN SPEED steep
DO THIS:
PRESSAND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
TO TURN UNIT OFF:
temp/timer
auto ]
hi mfittermed
lo reset
V 0N-0FF AFAN SPEED s[eep
Note: The control is capable of displaying temperature in
degrees Celsius or degrees Fahrenheit.
YOU WILL SEE:
temp/timer auto ]
lo reset
V ON-OFF A FAN SPEED steep
[-_ DO THIS:
PRESS
ON/OFF BUTTON
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
- The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. /_
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue \
to run during this time.
•There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
• The control will maintain the set temperature within 1 degrees Celsius, between 16 °C and 32 °C.
• After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
Figure 1 (VENT CLOSED)
i i
........................................................................_ :!_
Fresh Air Vent Control (on some models)
The Fresh Air Vent allows the air conditioner to:
Recirculate inside air - Vent Closed (see Fig. 1)
2. Draw fresh air into the room - Fresh Air (see Fig. 2)
3. Exchange air from the room - Vent Open (see Fig. 3)
i
Figure 2 (FRESH AIR) Figure 3 (VENT OPEN)
@2009 Electrolux Home Products, Inc. All rights reserved.
Loading ...
Loading ...
Loading ...