Loading ...
Loading ...
Loading ...
5
INSTALLING THE HANDLE
This appliance comes with a stainless steel handle. To install the handle please follow the below
instructions:
Tools needed: Phillips screwdriver
1. Peel away the gasket from behind the door. There are two mounting holes covered by caps. Remove
those caps and insert the screws into the hole.
2. On the other side of the door, align the handle with the screws from step 1. Tighten the screws using a
Phillips head screwdriver until the handle is flush and secured tightly against the door. (DO NOT
OVERTIGHTEN as this will cause the handle to become damaged.)
3. Reinstall the mounting caps, and the door gasket to its original position.
NOTE: If you choose not to use the handle supplied, simply follow step 1 to access the installation
screws, remove them, and then place the two decorative plugs into the two holes separately. Continue to
step 3 to replace the door gasket to its original position.
Loading ...
Loading ...
Loading ...