Loading ...
Loading ...
Loading ...
4
2. Installing the Battery in the Enclosure
3. Connecting the Battery to the Power Module
2.2 Installing the Battery
1
Loosen the hex screws located on the outside of the enclosure to remove
the battery retention L-shaped bracket.
Note: Save hardware for reinstallation.
2
Carefully slide the battery into the battery compartment.
Note: The battery terminals must face toward the front door.
3
Carefully reinstall and secure the battery retention L-shaped bracket.
1
1
Remove the hardware (hex nut, split lock and flat washer) from the battery
terminals.
Note: Save hardware for reinstallation.
2
Carefully connect and secure the red positive lug (+) to the red positive
(+) battery terminal. Slide the red terminal cover over the terminal post.
3
Secure the yellow ground lug and the black negative (-) battery lug to the
black negative (-) battery terminal using the stud. Slide the black terminal
cover over the terminal post.
4
Close and secure the box
before powering the unit.
2
3
4
Loading ...
Loading ...
Loading ...