Loading ...
Loading ...
1
1.Before unpack the unit,please inspect the carton carefully for any
damage.any damage,please take a picture or record all admage
carefully.if necessary,contact your dealer/distributor immediately. to
file a freight claim.
2.Unpack the carton,then inspect thr carton carefully for any damage
and check if all the spare parts are there .if there is any damage,please
take a picture or record all it carefully .if necessary,contact your
dealer/distributor immediately.
3.Water test before installation .although all our walk-in tub are water
tested before they leave our factory,there may be some loose of the
hose connections due to the transport.
(1)Place the tub on a flat surface in an area where it may be drained
after testing.
(2)Check if there is any loose of the connection system.
(3)Close the door,fill the tub with water to the overflow and allow
standing for a few minutes to inspect the tub for leaks.
(4)Insert the plug,start all the function for few minutes(which
includes the functions of massage,air bubble,underwater light, ozone
sterilization,aroma and so on.)inspect the tub completely any defect
must be reported to your dealer /distributor prior to installation in order
to have it covered under warrant.
TESTING YOUR WALK-IN TUB BEFORE INSTALLATION
BY FOLLOWING PROCEDURES
IMPORTANT:Failure to follow the pre-installation instruction
and water test the bathtub before installation,
manufacturer will not be liable for the removal
or installation of the bathtub.
Loading ...
Loading ...
Loading ...