Honeywell 5207 Safes & Door Locks Security Safe with Digital Dial Lock, 2.7 cu. ft., Black

User Manual - Page 4

For 5207.

PDF File Manual, 9 pages, Read Online | Download pdf file

5207 photo
Loading ...
Loading ...
Loading ...
3
IF YOU FORGET PASSCODE
If you forget your pass code, you can gain access to the safe by referring to the instructions
outlined in Step 1- OPEN USING THE OVERRIDE KEY. Once the safe is opened, you can then
reprogram a new pass code as outlined in Step 4 PROGRAMMING A NEW PASSCODE.
SETUP & OPERATION (Cont.)
STEP 4. PROGRAMMING A NEW PASSCODE
1. With the door opened, locate the battery compartment
cover and slide it to the right exposing the small reset
button. (See diagram)
2. Press in on the button and a small symbol will appear
on the LED display.
3. Turn the Digital Dial and stop on the first two numbers
of your new password, then press in on the dial. The
selected number will flash 3 times and a small dot
will appear on the LED display. This confirms that your
first set of numbers is programmed into memory.
4. Repeat this process 4 more times using your selected
two digits each time. Another small dot will appear
on the LED display each time confirming acceptance.
Remember, you only have 20 seconds between each
entry and if you time out you will have to begin again.
(Note the diagram to the right)
5. When the fifth and final entry is made, a small key
symbol will flash 3 times on the LED display
confirming that your new pass code has been
accepted into memory.
6. This is now the only pass code that will open
the safe and all prior codes have been eliminated.
You should make note of the new pass code and
store in a secure location away from the safe.
STEP 5. OPEN SAFE WITH NEW PASSCODE
1. Insert the access key into the lock
2. Turn the dial to the first 2 digit number of your new
pass code and press in on the dial. The first of five
small dots will appear on the LED display to confirm
entry.
3. Repeat this process four more times until all 5 sets of
2 digit numbers have been entered into the digital
keypad and the small unlock symbol appears on the
LED display.
4. Turn the Access Key to the left and pull the door
open.
5. To relock the safe, close the door and turn the access
key to the right.
6. Remove the access key and secure in a safe location.
1
ST
Successful
Entry
2
nd
Successful
Entry
3
rd
Successful
Entry
4
th
Successful
Entry
5
th
Successful
Entry
Loading ...
Loading ...
Loading ...