Loading ...
Loading ...
Loading ...
8
Reversing the Door Swing:
NOTE: If your unit’s handle is positioned horizontally, you do not need to
change the handle’s placement.
NOTE: Some units’ doors may not be user-reversible.
If you find the direction of opening the door of the appliance inconvenient, you can
change it. Holes on the opposite side have already been prepared at the factory.
This appliance can be opened from either the right side or the left. By default, the
door hinge is on the right side. If you prefer it on the left, please follow these
instructions:
1. Take off the upper hinge cover from the door and remove the screws that hold the
top hinge.
2. Lift the hinge straight up to free the hinge pin from the socket at the top of the
door.
3. Lift the door up and away to free its bottom socket from the hinge pin.
4. Remove the screws to the bottom hinge.
5. Remove the decorative caps from the opposite side and plug the holes from the
original side with the decorative caps.
6. Move the bottom hinge to the opposite side and tighten the screws. Use any lock
washers or nuts if they were used in the original installation.
7. Replace the door with the hinge pin on the bottom hinge. Place the top hinge pin
into the door. Insert screws into the top hinge and tighten.
1 Upper hinge cover
2 Upper hinge
3 Lower hinge
4 Kick plate
5 Handle
6 Fastener at the corner with hole
Door Handle Installation:
The door has two screw holes on each side, allowing you to install a handle (included).
To do so, align the handle with the screw holes on the side you prefer. Fix the handle
in place with the included screws, then cover the screw heads with the handle seal
(included).
NOTE: Some units ship with a stainless steel handle that does not require user-
installation. Units that are panel-ready do not include a handle.
Loading ...
Loading ...
Loading ...