Loading ...
Loading ...
Loading ...
13
A. AC Power Connector
Inlet adapter for A/C power cable
B. CH1 & CH2 XLR Pass Thrus
This XLR connection will loop the signal directly from it’s respective
input, so plugging into Thru 1 will provide a direct loop from CH1.
There is no DSP functionality on the loop through.
C. CH1 & CH2 XLR-1/4” Combo Input
XLR – 1⁄4” combination connector (1 for each input) are used for
the analog audio inputs.
D. Channel Volumes
Control the volume levels of each channel
E. Limit LED
Amplier is reaching clip.
F. Power Button
The Power Button is a momentary push button. It is used to
toggle the unit between the On and Off states. When in the Off
state, a short press and release of the Power Button will put
the unit into the On state.
G. LCD Panel
The LCD is used to display basic diagnostic information and
allow access to more advanced features through a menu system.
See the LCD GUI specication for more details on the LCD
menu system, features, and navigation. The LCD will refresh at
approximately 4Hz and is not suitable for meters or any other fast
motion items
H. Main Volume / Menu Navigation
Controls LCD Display
• Rotary encoder: In Menu - Clockwise down menu/Anti-
clockwise up menu
• Press to select menu item
• + On Home screen, Main Volume increase by rotating the
knob clockwise.
+ On Home screen, Main Volume decrease by rotating the
knob counterclockwise.
I. Back Button
Press to return to previous menu item
MIXER PANEL FUNCTIONS
Loading ...
Loading ...
Loading ...