Loading ...
Loading ...
Loading ...
6
Before First Use:
Read all instructions and safety information
carefully before first use. Please retain this
information for future reference.
1. Remove the appliance from the
packaging and check for any visible signs
of damage to the unit and cable.
2. Assemble as instructed.
3. Your appliance is now ready for normal
use.
4. Dispose of the packaging in a responsible
manner.
5. Place the unit on a firm and level surface.
Assembling Your Metal Stand Fan:
1. Remove the L-shaped screw (18) and
clamping washer (17) from the telescopic
stand (6), then atttach it to the Base
(15). To do this, place the Weight (16) on
the underside of the base (15) and the
clamping washer (17) in the centre of
the weight. Thread the L-Shaped Screw
(18) through the assembly and into
the thread in the Telescopic Stand (6).
Tighten firmly but do not overtighten.
2. Next attach the motor housing (9) to
the top of the telescopic stand (6).First
remove all the screws, etc. (7, 8, 19 & 20)
from the motor housing bracket.
7
6
9
8
19
20
7
8
19
3. Place the Motor Housing on the top of
the stand and thread the Large Pivot Bolt
(20) through the bracket and screw in the
Small Retaining Screw (8) and tighten
(but do not over tighten).
4. Fit the Large Pivot Knob (7) onto the end
of the Bolt (20) and the Small Adjusting
Knob (19). Hold the fan motor upright
and tighten the Large Pivot Knob (7) and
the Small Adjusting Knob (19).
8
20
1.
20
19
7
Assembly of your stand fan grille:
2. Remove the 4 grille locking screws from
the main body.
Loading ...
Loading ...
Loading ...