Loading ...
Loading ...
Loading ...
Care and Cleaning
Clean lint screen after every load.
Do not store or place laundry products
on top of dryer at any time. They can
damage the finish or controls.
To reduce risk of fire or serious inju ryto persons or property, comply
with the basic warnings listed in Important Safety Instructions and those listed
below.
o Before cleaning the dryer interior, unplug the electricalpowercerdto avoid
electrical shock hazards.
Do not use any type spray cleanser when cleaning dryer interior. Hazardous
fumes or electrical shock could occur.
Inside
o Cleanthe lint screenafter every load. Lint build-up inthe screen restricts airflow,
which causeslonger drying times.The screen islocated at the bottom of the door
opening. Remove by pulling straight up. Remove the lint and replace the
screen.
CAUTION - Risk of Fire - A clothes dryer produces combustible lint. The
dryer must be connected to an exhaust outdoors. Regularly inspect the
outdoor exhaust opening and remove any accumulation of lint around the
outdoor exhaust opening and in the surrounding area.
Occasionally awaxy build-up mayform on the lint screenfrom usingdryer-added
fabric softener sheets. To remove this build-up, wash the lint screen in warm,
soapy water. Dry thoroughly and replace. Do not operate the dryer without the
lint screen in place.
Ifthe dryer drum becomesstained from noncolorfast fabrics, cleanthedrum with
a damp cloth and a mild liquid household cleanser. Remove cleanser residue
before drying the next load.
Every18 months a Searsor other qualified servicedealer should clean the dryer
cabinet interior and exhaust duct. Theseareascan collect lint and dust overtime.
An excessiveamount of lint build-upcould result in inefficient drying and possible
fire hazard.
Outside
• Clean the cabinet with mild soap and water. Never use harsh, gritty or
abrasive cleansers.
, If the cabinet becomes stained, clean with diluted chlorine bleach [1/2 cup
(I20 ml) in I quart (.95 liter) water]. Rinse several times with clear water.
Removeglue residue from tape or labelswith a mixture of warm water and mild
detergent. Or, touch residue with the sticky side of the tape or label.
Before moving the dryer, place a strip of cardboard or thin fiberboard under
the front leveling legs to prevent damage to floor.
Loading ...