Loading ...
Loading ...
Loading ...
3.
Remote Battery Replacement:
A. Open the remote battery cover by inserting a coin and turning it to the left until it points to the
unlock symbol.
B. Remove and replace with 1pc CR2032 Battery. Please ensure the positive side of battery is
facing up and battery is under metal slot.
C. Replace battery cover and turn the cover until it points to the lock symbol
4.
Shutdown:
You can turn off the power to shut down the treadmill at any time. This will not damage the treadmill.
5.
Attention:
A. Check the power and Safety Key (No. 74) before starting any exercise.
B. In the event of an emergency, pull off the Safety Key (No. 74) to stop the treadmill. This will set
the treadmill back to the default settings.
C. If there is any problem, please contact the distributor. Do not attempt to disassemble or perform
maintenance on the treadmill as this can be damaging to the treadmill.
6. Error display:
If the treadmill displays an error code, please contact Customer Service at
support@sunnyhealthfitness.com.
E01: Error type (meter does not receive controller signal)
Check the communication line connection is normal or not, then replace the meter; if not resolved,
replace the controller.
E03: Error type (high voltage)
Check the voltage stable or not, if it’s too high more than 275 V, then replace the controller.
E04/E13: Error type (the current is excessive during exercising)
First check whether the running board friction is too much, whether it needs lubricate oil. If not
resolved, replace the controller.
E05: Error type (over current or motor shutdown)
Motor overload, if the load is normal, replace the controller.
E06/E14: Error type (motor burn or low voltage)
First check the voltage is not less than 115V, then replace the motor. If not resolved, replace the
controller.
E07: Error type (controller does not receive display board signal)
Check the communication line connection is normal or not, then replace the meter; if not resolved,
replace the controller.
SAFE: Safety Key (No. 74) is unconnected.
Loading ...