Loading ...
Loading ...
2.Convert Surface Burners for use with LP/Propane Gas
This conversion kit contains multiple gas orifices for converting different styles of sealed gas surface burners. Determine
which style of gas surface burner is being converted and select the proper orifice from the designated orifice pack for that
jspecific burner styJe and size.
lSave the natural gas orifices removed from the appliance for possible future conversions to natural gas.
BURNER STYLE #1 (Non Mounted Burner) NoMountingScrews J
This burner style is not secured to the cooktop with screws and the burner head
l
can be lifted off the cooktop to access the orifice holder and orifice. The orifice
holder for this style of burner passes through a circular cut out in the cooktop as '_
seen in the photo. I _ _+_This style of burner will use the orifices contained in the main envelope of the
converting this burner style.
BURNER STYLE #2 (Screw Mounted Burner)
This burner is secured to the cooktop surface by two screws as seen in the photo.
The screw heads may be different than those illustrated. When the burner is
removed the orifice holder cutout in the cooktop can be seen to have an irregular
elongated shape. The mounting screw sockets for the burner head are also
visible. This style of burner will use the orifices contained in the separate smaller
envelope found inside the main envelope of the LP kit # GRLP3. This envelope
will be labeled " SCREW MOUNTED BURNER LP KIT". Follow the instructions on
page 4 when converting this burner style.
BURNER STYLE #3 (Screw Mounted Burner)
This burner can be identified by the two piece cap as seen in the photo. It is
secured to the cooktop surface by two screws. The screw heads may be different
than those illustrated. When the burner is removed three orifice openings can
be seen in the cooktop. This style of burner will use the orifices contained in the
separate smaller envelope found inside the main envelope of the LP kit # GRLP3.
This envelope will be labeled " SCREW MOUNTED BURNER LP KIT". Follow the
instructions on page 5 when converting this burner style.
OVAL BURNERS
There are currently two different oval surface burners used and each one requires
a different LP orifice. Both burners are rated 9500 BTU and are very similar in
appearance when the burner caps are in place. Use the photos at right to identify
which oval burner is on your range and use the appropriate orifice for that burner
when converting.
Oval Burner A - Use orifice size .89 from the main envelope. The orifice holder
for this burner will have the circular cooktop opening as seen in Burner Style #1.
Oval Burner B - Use orifice size .93 from envelope labeled " SCREW MOUNTED
BURNER LP KIT". The orifice holder for this burner will have the elongated
cooktop opening as seen in Burner Style #2.
NOTE: Some ranges may include multiple burner styles. When this is
encountered use the appropriate orifice for each burner styJe and size.
BURNER STYLE #1
Burner Secured With Screws Elongated Cooktop Opening
BURNER STYLE #2
Burner Secured With Screws J
BURNER STYLE #3
Oval Burner B
Top View Bottom View
BURNER STYLE #1 CONVERSION INSTRUCTIONS
Use caution when replacing each burner cap
so the electrode is not damaged.
Example of Burner Assembly
letter
located f__
inside _._ ,
Burner _ J=l_:_;_ _,_._
Head _//_
B .....
Head i i_':g& _ :!i
theMatchletter
stamped ( t j) _r_ elect1\ ;ode
on Burner \ _> J
Skirt with _Bumer Skirt
Burner Head _ .........
and Burner Cap
B = 9.5k
D=12k
E = 14 or 14,2k
B = 9.5k
Top View Bottom View
Unlike the standard gas range,
THIS COOKTOP ISNOT REMOVABLE.
Do not attempt to remove this cooktop.
B = 9.5k
(some models)
A= 5k
B = 9.5k
_=.._Round Or Oval Center Burner --
B = 9.5k
D = 12k
E = 14 or 14.2k
F = 16 or 16.2
B _=&,Sk
( Continued on page 4 )
Loading ...
Loading ...
Loading ...