Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
10
Use the Remote Controller
WARNING: ADULT OPERATING REQUIRED!
The remote control has precedence over foot pedal operation.
(The foot pedal won’t work while you operate the Remote Controller)
1. Connect button (build connection): Lift the battery compartment door on
the back of the controller and insert two AAA (LR03) batteries.
NOTE: Batteries not included. Refer to the battery information on page 3.
Press and hold the connect button for 3 seconds, the indicators ashes, means
that the remote controller is in the connected state. Then power ON the product:
•
The indicators goes to long bright, means the connection successful.
•
If indicator no response, means the connection failed. Turn o the remote
controller (by removing the batteries) and the product. And try again.
2. Brake button: Press the button to stop the vehicle, press it again to release
the brake.
Note:
•
Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
•
After replacing the batteries of the remote controller, please rebuild the
connection. (step 1)
Connect button
Forward button
Left turning
button
Right turning
button
Brake button
Indicators
Reverse button
Loading ...
Loading ...