Loading ...
27" 168.6 cm) oven
25-3/8" (64.5 crn)
recessed width ..............
41"
(104.1 crn)
recessed
height
23"
(58.4crn)\
max,
recessed
depth
42-7/16"
1107.8crn)
overall
height
41"
1104.1 crn)
recessed
height
23"
(58.4crn[
depth
29-3/4
(75.6 crn)
erall width
T
41-1/4"
1104.8crn)
cutout
height
1-112"
13.8crn) rnin.
bottom of
cutout to top
of cabinet
door
_-_ 27" (68.6 crn) __
min.
cabinet width
25-1/2"
(54.8 crn) --
cutout
width
27" (68.6 cm} oven
1"(2.5crn)top
of cutout to
bottom of upper
cabinet door
1g-1/4"
(48.9 crn)
bottom of
cutout to
floor
{
cabinet
23-1/4" 15&1 crn)
rnin.
cutout depth
._ 23" (58.4 crn)
recessed oven
depth
recessed
oven
oven
front
Cabinet side view
41-1/4"
1104.8crn)
cutout
height
I
1-1/2"
(3.8 crn) rnin.
bottom of
cutout to top
of cabinet
door
__ 30"n_o,._..Lcrn)__
rnln.
cabinet
m
28-1/2"
.___172.4 crn)
cutout
width
30" (76.2 cm} oven
1" (2.5 crn) top
of cutout
to bottom
of upper
cabinet door
19-1/4"
(48.9crn)
bottom
of cutout
to floor
Cabinet filler kits are available from your dealer.
Use a matching color kit ifoven issmaller than
your cabinet opening.
27" (68.6cm} oven filler height is 7-13/16"
119.8cm)
Black -- 4378950
White -- 4378951
Almond- 4378952
30" (76.2cm} oven filler height is 4-13/16"
112.2cm)
Black -- 4378944
White -- 4378945
Almond- 4378946
Toolneeded:
Phillips screwdriver
Partssupplied:
Copies of the standards listed may be obtained from:
* National Fire Protection Association
Ratteryrnarch Park
Quincy, Massachusetts 02269
** CSA International
8501 East Pleasant Valley Road
Cleveland, Ohio 44131-5575
Page 1
Yoursafety and thesafety of others are
veryimportant.
Wehaveprovided many important safety
messagesin this manualand on your appliance.
Always readand obeyall safety messages.
This isthe safety alert symbol.
This symbolalerts youto potentialhazards
that can kill or hurt you andothers.
All safety messageswill follow the safety alert
symbol and eitherthe word "DANGER"or
"WARNING".Thesewords mean:
Youcanbe killed or seriouslyinjuredif you
don'tfollow instructions.
All safety messageswill tell you what the potential
hazardis, tell you howto reducethe chance of
injury, and tell you what can happenif the
instructions are not followed.
important: Observe all governing codes
and ordinances.
Proper installation isyour responsibility.
Have a qualified technician installthis oven.
Oven location should be away from strong draft
areas, such as windows, doors and strong
heating vents.
Cabinet opening dimensions that are shown
must be used. Given dimensions provide
minimum clearance.
Recessed installation area must provide
complete enclosure around the recessed
portion of the oven.
Electrical ground is required. See "Electrical
requirements."
Electrical supply junction box should be located
3 inches(7.6cm) maximum belowthe support
surface when oven is installedin a wall cabinet.
Cutout for wiring should be inthe right rear or
left rear corner. For undercounter installation, it
is recommended that the junction box be
located inthe adjacent right or left cabinet. If
installingjunction box on rear wall behind oven,
junction box must be recessed and located in
the upper or lower right or left corner of cabinet.
Oven support surface MUST be solid, level and
flush with bottom of cabinet cutout.
Excessive Microwave Energy Exposure
Do not attempt to operate the
microwave oven with the door open.
Do not tamper with or defeat the safety
interlocks.
Do not place objects between the
microwave oven front face and door.
Do not allow soil or cleaner residue to
accumulate on sealing surface of the
microwave oven door.
Do not operate the microwave oven if
damaged.
Do not operate the microwave oven if:
-- door is bent.
-- hinges and latches are broken or
loose.
-- door seals, sealing surfaces or
glass are broken.
The microwave oven door must close
properly to provide safe operation.
Have a qualified repair person adjust,
repair and check microwave oven for
microwave leakage after a repair is
made.
Do not use microwave for commercial
purposes. The microwave oven in this
unit is designed for household use
only.
Failure to follow these instructions
could result in exposure to excessive
microwave energy.
It is the customer's responsibility:
To contact a qualified electrical installer.
To assure that the electrical installation is
adequate and in conformance with National
Electrical Code, ANSI/NFPA 70 m latest
edition*, or Canadian Electrical Code, 022.1-
1982 and C22.2 No. 01982 (or latestedition)**
and all local codes and ordinances.
Loading ...
Loading ...
Loading ...