Loading ...
Loading ...
Loading ...
en Faults and what to do about them
44
Odours in the washing
machine.
Depending on the model, run the Drum Clean Û 90 °C or i Cottons 90 °C
program without laundry.
Add washing powder or a detergent containing bleach.
Note: To prevent foaming, only use half the amount of detergent recommended
by the detergent manufacturer. Do not use detergents designed for wool or del-
icates.
The Å symbol lights up
in the display panel. Foam
may also be leaking from
the detergent drawer.
Have you used too much detergent?
Mix one tablespoon of fabric softener with 1/2 litre of water and pour it into
compartment II (not suitable for outdoor clothing, sportswear or items stuffed
with down).
Use less detergent in the next wash cycle.
Loud noises, vibrations
and machine "move-
ment" during the spin
cycle.
■ Is the appliance aligned? Align the appliance ~ Page 17
■ Are the appliance's feet fixed? Secure the appliance's feet ~ Page 17
■ Have the transport braces been removed?
Remove the transport braces ~ Page 14
The display panel/indica-
tor lights do not work
while the appliance is run-
ning.
■ Has there been a power failure?
■ Have the fuses blown? Reset/replace the fuses.
■ If the fault occurs repeatedly, call customer services.
There is detergent resi-
due on the laundry.
■ Some phosphate-free detergents contain water-insoluble residue.
■ Select à Rinse or brush the laundry after washing.
The Õ symbol lights up
in the display in pause
mode.
■ Door is locked due to safety reasons (water level and/or temperature are
too high). It is not possible to add laundry. Close the door immediately, if
necessary.
■ Press the A Start/Reload button to continue the program.
If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required:
■ Switch off the appliance and pull out the mains plug.
■ Turn off the tap and call customer services.
Faults Cause/Remedy
Loading ...
Loading ...
Loading ...