Loading ...
Loading ...
Loading ...
6
• Place the bread into the bread slots in position 1 (right hand
side of the toaster) for one or two slices only.
• Turn the Variable Browning Control Dial to the desired setting,
it is recommended to use setting 4 for the first time.
• Depress the Bread Carriage Lever. The toaster will begin
toasting and the Cancel button light will illuminate.
NOTE: The carriage lever will only depress and hold in place
when the appliance is connected to the power supply.
• When completed, the Bread Carriage Lever will automatically
rise and lift the toast from the toaster.
• During the toasting process, you can stop this at any time by
pressing the Cancel button.
• To toast frozen bread, do not adjust the Variable Browning
Control from your normal setting. Place the frozen bread in the
bread slots, depress the Bread Carriage Lever and press the
Defrost Button. The button will illuminate and the toaster will
operate for a longer period defrosting and toasting the bread.
• If you want to reheat bread that was previously toasted but
gone cold. Press the Bread Carriage Lever down vertically
until it is positioned in place, then press the Reheat button.
The Reheat and Cancel buttons will illuminate and the toaster
will operate for a short period of time and will reheat the
bread.
• If the toaster starts to smoke, press the Cancel button to stop
toasting immediately.
OPERATING INSTRUCTIONS
• The toaster controls operate each of the two slot positions. In
order to use the toasting slots in position 2, position 1 MUST
be activated first. If only toasting one or two slices of bread,
you MUST use position 1 (right hand slots).
• Make sure the crumb trays are completely in place before
using.
• Plug the power cord into the outlet.
Loading ...
Loading ...