Loading ...
Loading ...
Loading ...
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal rights.
Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of warranties and
remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A defective
product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to place of purchase
immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge
any parts which our examination shall disclose to be defective and under warranty. These warranties shall be valid only when a sales receipt
showing the date of purchase accompanies the defective product or defective part (s) being returned. For part (s) after 90 days, please remit your
request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal use and
service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which has been repaired
or altered in any way so as to affect adversely its
performance or reliability, nor shall these warranties apply to any product or part which has been subject to misuse, neglect, accident or wear and
tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied warranties
of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability and no implied
warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household use and not for
commercial or business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied
warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any product,
or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the repair, or
replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special damages may vary from state
to state, so the above limitations may not apply in all cases.
© Copyright 2014 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138
1. Before starting to change motor oil drive the motor until the oil has a temperature of approx. 40°- 50°C, 104°- 125° F. Less tempera-
ture will reduce the ow rate due to the high viscosity of the oil. If the oil is too hot the sealings of the pump might be disturbed.
2. Shut down the engine after having reached sufcient temperature.
3. Push the hose with the suction probe onto the pump socket and push the drain hose onto the drain socket, fasten both by using
hose-clamps in or under to avoid the hoses coming loose due to the oil pressure.
4. Unwind the suction probe and straighten it properly before inserting through the dipstick-tube into the engine. Otherwise the pump
will draw no or not enough oil.
5. Insert the suction-probe into the oil dipstick-tube and push it gently down to the lowest position of the oil pan.
6. Please use suitable container to collect the old oil and lead the drain hose into this container.
7. Connect the oil-extractor to the 12V car battery. Make sure that the clamps are connected with the correct poles of the battery (red
clamps to “plus”, black clamp to “minus”)
8. Switch the pump on and pump the oil out of the engine.
9. As soon as no further oil is pumped, switch off the pump. Do not let the pump run without oil.
10. Fill the engine with fresh motor oil according to the maintenance instruction for your car and check the oil level with the oil dipstick.
11. After nishing your work clean the pump thoroughly by pumping some fresh oil.
12. Remove the hoses form the pump, plug them together and store the whole unit in a place where it is protected against dust.
ATTENTION:
Never let old or fresh oil seep into the ground or into the sewage system. You will harm the environment and you will make yourself li-
able for prosecution. Collect the old oil and dispose at your local collecting station, petrol station or oil dealer.
IMPORTANT NOTICE:
The working period for this oil extractor should not exceed 30 minutes. After this period please switch off the pump and let it cool down.
OPERATION