Loading ...
Loading ...
Loading ...
14 15OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
To activate the child safety device
• Activate the appliance with . Do not set the
heat settings.
• Touch
for 4 seconds ( button for
models WHI323BD/WHI955BD). The symbol
comes on.
• Deactivate the appliance with
.
To deactivate the child safety device
• Activate the appliance with . Do not set the
heat settings. Touch
for 4 seconds (
button for models WHI323BD/WHI955BD).
The symbol comes on.
• Deactivate the appliance with
.
To override the child safety device for only one
cooking time
• Activate the appliance with . The symbol
comes on
.
• Touch
for 4 seconds ( button for models
WHI323BD/WHI955BD). Set the heat setting in 10
seconds. You can operate the appliance.
• When you deactivate the appliance with
,
the child safety device operates again.
Sense Boil® (This function only applies to
WHI635BD & WHI643BD&WHI645BD&WHI743BD&
WHI943BD & WHI955BD)
The function automatically adjusts the temperature of
water so that It does not boil over once it reaches the
boiling point.
TIPS & INFORMATION
IMPORTANT
If there is any residual heat on the cooking
zones you want to use, an acoustic signal is emitted and
the function does not start.
1. Touch
to activate the hob.
2. Touch
to activate the function.
A blinking
/ icon (for WHI955BD) appears for
cooking zones on which you can presently use the
function.
3. Touch the control bar of any available cooking zone
for which you want to start the function (between the
heat setting 1-9).
The function starts.
If you do not choose any cooking zone within 5 seconds
the function does not activate.
TIPS & INFORMATION
IMPORTANT
Once the function starts the indicators above
the symbol come on one after another until the
water reaches the boiling point(except WHI955BD)
When the function detects the boiling point the hob
emits an acoustic signal and the heat level automatically
changes to 5.
If all cooking zones are already in use or there is some
residual heat on all of them, the hob emits a beep sound,
the indicators above
blink and the function does
not start.
To deactivate the function touch
(the function
deactivates and the heat setting goes down to 0) or
touch the control bar and adjust the heat setting manual
Hints & Tips for SenseBoil®
The function works best for boiling water and preparing
potatoes.
TIPS & INFORMATION
IMPORTANT
It does not work with cast iron and non-stick cookware,
e.g. with a ceramic coating. Enamelled steel pots are
recommended for achieving the best results while boiling
potatoes.
Check if the pot you chose is suitable for SenseBoil® by
monitoring the first cooking session.
To use SenseBoil® efficiently follow the advice below:
• FiIl between half to three quarters of the pot with cold
tap water leaving 4 cm from the rim of the pot empty.
Do not use less than 1 or more than 5 litres of water.
Make sure the total weight of the water ( or the water
and potatoes) ranges between 1-5 kg.
• If you want to cook potatoes, make sure they are
completely covered with water, but remember to leave
at least one quarter of the pot empty.
• To achieve the best results cook only whole, unpeeled,
medium-sized potatoes.
• Make sure you do not pack potatoes too tightly.
• Avoid producing external vibrations (e.g. from using
a blender or placing a mobile phone next to the
appliance) when the function is running.
• If you want to use salt, add it after the water reaches the
boiling point.
• The function may not work properly for water kettles
and espresso pots.
OPERATING INSTRUCTIONS (CONTINUED)
HobHood(except WHI323BD)
This is an advanced automatic function which connects
the hob to a special hood. Both the hob and the hood
have an infra-red signal communicator. Speed of the fan
is defined automatically on basis of mode setting and
temperature of the hottest cookware on the hob. You can
also operate the fan from the hob manually.
TIPS & INFORMATION
IMPORTANT
For most of the hoods the remote system is originally
deactivated. Activate it before you use the function. For
more information refer to hood user manual.
Operating the function automatically
The default automatic mode from the factory is H5. You can
change the automatic mode by following the instructions
below. When you activate the hob the hood will adjust the
fan speed automatically. Please note the below table is a
guide, the fan speed varies depending on the temperature
measured on the cooking zones of the cooktop which can
be affected by the heat setting(s) selected as well as the
size and volume of what you are cooking.
Automatic modes
AUTOMATIC
LIGHT
BOILING FRYING
Mode H0 Off Off Off
Mode H1 On Off Off
Mode H2 On Fan speed 1 Fan speed 1
Mode H3 On Off Fan speed 1
Mode H4 On Fan speed 1 Fan speed 1
Mode H5 On Fan speed 1 Fan speed 2
Mode H6 On
Fan speed
2
Fan speed 3
1. The hob detects the boiling process and activates fan
speed in accordance with automatic mode.
2. The hob detects the frying process and activates fan
speed in accordance with automatic mode.
3. This mode activates the fan and the light and does
not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
for 3 seconds. The display comes
on and goes off
3. Touch
for 3 seconds.
4. Touch
a few times until comes on.
5. Touch
of the Timer to select an automatic mode
TIPS & INFORMATION
IMPORTANT
To operate the hood directly on the hood panel
deactivate the automatic mode of the function.
TIPS & INFORMATION
IMPORTANT
When you finish cooking and deactivate the hob,
the hood fan may still operate for a certain period of
time. After that time the system deactivates the fan
automatically and prevents you from accidental activation
of the fan for the next 30 seconds.
Operating the fan speed manually
You can also operate the function manually. To do that
touch
when the hob is active. This deactivates
automatic operation of the function and allows you to
change the fan speed manually. When you press
you
raise the fan speed by one. When you reach an intensive
level and press
again you will set fan speed to 0
which deactivates the hood fan. To start the fan again
with fan speed 1 touch
.
TIPS & INFORMATION
IMPORTANT
To activate automatic operation of the function,
deactivate the hob and activate it again.
Activating the light
You can set the hob to activate the light automatically
whenever you activate the hob. To do so set the
automatic mode to H1 – H6.
TIPS & INFORMATION
IMPORTANT
The light on the hood deactivates 2 minutes after
deactivating the hob.
Hints and Tips for Hob
Hood function
When you operate the hob with Hob2Hood function:
• Protect the hood panel from direct sunlight.
• Do not spot halogen light on the hood panel.
• Do not cover the panel.
• Do not interrupt signal between the hov and the
hood(for example with a hand or a cookware handle).
(Hood in the picture is only an example).
Loading ...
Loading ...
Loading ...