Loading ...
Loading ...
Loading ...
7
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
▪ Remove the exterior and interior packing.
▪ Before connecting the refrigerator of your Serving Cart to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
▪ Clean the interior surface with lukewarm water using a soft cloth.
INSTALLATION OF YOUR APPLIANCE
▪ For satisfactory water drainage of the sink, and proper cabinet door function, it is important to level the
Serving Cart in both directions.
▪ Avoid locating the unit in moist areas as this may result in the risk of electrical shock.
▪ Do not under any circumstances cut or remove the third (ground) prong from the power cord of your
refrigerator. Any questions concerning power and/or grounding should be directed toward a certified
electrician or an authorized service center.
▪ After connecting the appliance to the power supply, allow the Refrigerator to cool down for 2-3 hours
before placing items inside.
NOTE: If you are planning on keeping the Serving Cart outdoors while not in use, use the provided vinyl
cover to protect the unit from the sunlight and prevent discoloration of the cart.
NOTE: To remove the crisper and/or shelves of the refrigerator, a clearance of 10 inches is required. When
placing the refrigerator inside the cart, leave at least 3/16” clearance on both sides, 1/16” at the top, and 2”
at the rear. Be sure that airflow under the appliance is not blocked.
Loading ...
Loading ...
Loading ...