Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
7
STEP 4
Connect P5 Front Tube Assembly using Spring Lock
as shown in FIGURE 4.
NOTE: Bungee Cord is an assembly aide
and stays in place.
STEP 5
Connect P5 Front Tube Assembly to P1 - Left
Lower Tube Assembly and P2 - Right Lower Tube
Assembly using H2 Bolts, H4 Washers, H6 Bushing
and H5 Wing Nuts as shown in FIGURE 5 and DETAIL B.
Note: This is a pivot point. “Snug” tighten H5 Wing Nuts only.
Make sure this assembly pivots freely.
FIGURE 4
Spring Lock
Bungee
Cord
Spring Lock
Bungee
Cord
P5
P5
P2
P1
P5
P1
H2
H4
H5
P15
H6
FIGURE 5
DETAIL B
NOTE: Push H2 Bolts
around the inner bungee
cord.
NOTE: Use “bottom” hole
for this assembly.
Loading ...
Loading ...
Loading ...