Loading ...
Loading ...
Loading ...
BISSELL.com 9
5
Maintaining the Brush Roll
1 2
Turn the foot over and locate the brush
roll cover tab. Use a coin to remove the
brush roll, turning counter-clockwise to
unlock.
Make sure the vacuum is OFF. Press the
vacuum foot release button to disconnect
it from the vacuum.
3 4
Grasp the brush roll and remove from the
foot window area. Clean off hair or debris
from brush. Place the cleaned brush roll back
into the foot of the machine and use coin to
turn lock clockwise to lock into place.
Slide the tab down to unlock and lift the
corner cover piece.
6
BRUSH ROLL RESET:
Turn machine OFF and remove debris
from brush roll and brush roll endcap
area, following the steps above. Replace
brush roll and turn machine ON to reset.
If the brush roll stops spinning due to
debris, the LED light will turn solid red.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting
NOTE: Make sure the brush roll cover tab is locked back into place to prevent breaking
or faulty brush roll.
Loading ...
Loading ...
Loading ...