Loading ...
Loading ...
Loading ...
HOWTHEWATERDmSPENSERWORKS
Thewatertank,locatedbehindthedrawersintherefrigerator
compartment,automaticallyfillsaswaterisdispensed.For
properdispenseroperation,therecommendedsupplywater
pressureshouidfallbetween30psiand100psi.
Aftertherefrigeratorisconnectedtothewatersupply,filIthe
watertankbydrawingoneglassofwater._tmaytakeabout
11/2minutesafteractivatingthedispenserpaddlebeforewater
beginstofillthisfirstglass.Continueflushingthesystemfor3
minutestoridthetankandplumbingconnectionsofany
impurities.Thewaterdispenserhasabuiltinshutoffdevice
thatwiIIstopthewaterflowafter3minutesofcontinuoususe.
Simplyreleasethedispenserpaddletoresettheshutoff
mechanism.
HOWTHEICEDISPENSERWORKS-SIDEMOUNTED
Theicemakerandcontainerarelocatedinthetopofthe
freezercompartment.Aftertherefrigeratoris installedproperly
andhascooledforseveral
hours,theicemakercan
beginmakingicewithin24
hours.Airinnewplumbing
linesmaycausetheice
makertocycletwoorthree
timesbeforemakinga fulI
trayofice.Tobeginice ___-.
production,lowerthewire
signalarmtothe"down"or
ONposition.Withnousageit
wilItakeapproximately2
daystofilltheicecontainer.
ON
The ice maker turns off automatically when the ice container
becomes full. To stop the ice maker, lift the wire signal arm until
it clicks, and locks in the "up" or OFF position.
HOWTHE ICE DISPENSER WORKS -REAR MOUNTED
The ice maker and container are
located in the top of the freezer
compartment. After the
refrigerator is installed properly
and has cooled for several
hours, the ice maker can begin
making ice within 24 hours. Air in
new plumbing lines may cause
the ice maker to cycle two or
three times before making a fuil
tray of ice. Ice production is
controlled by the ice maker's On/
Off power switch. To gain access
to the ice maker, pull the ice cream tray out. Press the switch to
the "O" position to turn it Off and press it to the '1" position to
turn it On. With no usage it will take approximately 2 days to filI
the ice container. The ice maker also has a buibin wire signal
arm,which automatically stops ice production when the ice bin
is full. This signal arm should not be used to manually stop the
ice maker.
The ice maker produces 4 to 6 pounds of ice every 24 hours
depending on usage conditions, ice is produced at a rate of 8
cubes every 75 to 90 minutes.
Because of new plumbing connections, the first production of
ice cubes may be discolored or have an odd flavor. These
should be discarded until the cubes made are free of
discoloration and taste.
ICE ANDWATER DISPENSER FEATURES
The ice and water dispenser conveniently dispenses chilled
water, and ice cubes or crushed ice, depending on the model.
To operate the ice dispenser, select the ice option desired
using the touchpad. Press a glass against the dispensing
paddle as far up as possible to catch all ice. To stop
dispensing ice, pulI glass away from dispensing paddle. Do
not remove the glass until the ice has completely dispensed.
(Complete instructions for the dispenser operation are
attached to the inside of the freezer door.)
lOB DISPENSER TIPS
,, Ice cubes stored too long may develop an odd flavor,
Empty the ice container and ensure that the wire signal
arm is in its "down" or ON position (side mounted) or the
ice maker's On/Off power switch is turned On-set to the "r'
position (rear mounted). The ice maker will then produce
more ice.
OccasJonaJly shake the ice container to keep ice
separated.
Keep the wire signal arm in its "up" or OFF position (side
mounted) or the ice maker's On/Off power switch turned
Off-set to the "O" position (rear mounted) until the
refrigerator is connected to the water supply or whenever
the water supply is turned off.
12
Loading ...
Loading ...
Loading ...