Loading ...
Loading ...
Loading ...
9
Continuous Drain -
A standard garden hose can be used for continuous gravity flow into a floor drain.
1. Unscrew the cap on the back of the unit.
2. Install a standard garden hose to the back of the unit, ensuring there are no kinks in the hose.
3. Ensure that the dehumidifier is level, even a slight tilt can cause the water to drip down into
the drain bucket and not through the garden hose.
Attaching Pump Drain Tube -
1. Push in on the outer ring of the pump connector on the back of the dehumidifier (See photo).
2. Slide the drain adapter into the opening and then release the outer ring of the pump connect.
3. Gently pull the drain adapter to ensure it is locked into place.
4. To remove the drain hose push in on the outer ring of the pump connector and pull on the
drain tube connector.
For Model(s) with UVC
Press and hold for 3 second until the UV indicator turns on. To turn the UV function o, press
and hold the mode button for another 3 seconds until the indicator turns o.
Should any UV light be exposed, stop use immediately and contact customer service.
Automatic Defrost - When frost builds up on the evaporator coils, the compressor will stop and
the fan will continue to run until the frost disappears. When the coils are completely defrosted, the
compressor will automatically restart and dehumidify will resume. If the frost does not completely
melt on its own, unplug the appliance overnight. Be sure to confirm the filter is clean before
running again.
Garden Hose
Loading ...
Loading ...
Loading ...