Loading ...
Loading ...
Loading ...
Page 11
Installation
(Continued)
Store excess wires in the wiring box.5.
OPTIONAL: If you purchased a single-piece chimney cover, attach it to the hood in this step.6.
Drop oil tunnel into recess support near rear of hood. Refer to Figure 9.7.
To install baffle filters and stainless spacer(s), refer to 8. Baffle Filters and Stainless Steel Spacers on Page 18 for
baffle filter and stainless spacer placement. Refer to Figure 10 for the following five steps:
Angle baffle filter toward back of hood.
Push baffle filter up until almost level.
Slide forward into recess behind the front of hood.
Lower baffle filter.
Slide back until it fits into resting positions.
Repeat Step 8 to install all baffle filters and stainless spacers.9.
OPTIONAL: Install heating lamps (not included) last. 120-Volt, 250-Watt maximum per lamp.10.
Turn power ON in control panel. Check all lights and fan operations.
11.
Make sure to leave this Installation Guide for the homeowner.12.
Figure 9
Figure 8
Figure 10
Figure 7
Loading ...
Loading ...
Loading ...