Loading ...
Loading ...
Loading ...
11 ENGLISH
NOTE:
Push down the wheel guard straight. Otherwise,
you cannot push the wheel guard completely.
3.
While keeping the lock lever and wheel guard position as
described in step 2, rotate the wheel guard toward C, and then,
change the angle of the wheel guard according to the work.
2
B
1
A
B
B
C
C
► 1. Wheel guard 2. Hole
NOTE: Push the wheel guard completely. Otherwise,
you cannot rotate the wheel guard.
To remove wheel guard, follow the installation proce-
dure in reverse.
When using a depressed center
wheel or ap disc
Optional accessory
WARNING: When using a depressed center
wheel or a ap disc, the wheel guard must be
tted on the tool so that the closed side of the
guard always points toward the operator.
1
2
► 1. Depressed center wheel 2. Wheel guard
When using an abrasive cut-o /
diamond wheel
Optional accessory
WARNING: When using an abrasive cut-o
/ diamond wheel, be sure to use only the special
wheel guard designed for use with cut-o wheels.
WARNING: NEVER use cut-o wheel for side
grinding.
1
2
► 1. Abrasive cut-o wheel / diamond wheel 2. Wheel
guard for abrasive cut-o wheel / diamond wheel
When using a wire cup brush
Optional accessory
CAUTION: Do not use wire cup brush that is
damaged, or which is out of balance. Use of dam-
aged brush could increase potential for injury from
contact with broken brush wires.
1
► 1. Wire cup brush
Loading ...
Loading ...
Loading ...