Loading ...
1 “ON/OFF” button
2 Programme selector
3 “Start/Pause” button
4 “Spin Speed” button
5 “Multi Rinse” button
6 “Cleaning Action” button
7 “Start Delay” button
8 “Energy saver” / “Key lock“
button
9 “Temperature” button
DISPLAY INDICATORS
Door locked
Energy saver activated
Pre-wash activated
Start Delay activated
Key lock activated
Washing phase
Indicates washing phase of the cycle
Failure: Call Service
Refer to Troubleshooting section
Failure: Water lter clogged
Water cannot be drained; water lter
might be blocked
Failure: No water
No or not sucient inlet water.
In the event of any failure, refer to the
“TROUBLESHOOTING” section
THANK YOU FOR BUYING A HOTPOINT PRODUCT.
In order to receive a more complete assistance,
please register your appliance on
www.hotpoint.eu/register
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bolts are removed. For more detailed
instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
PROGRAMME CHART
EN
Quick guide
PRODUCT DESCRIPTION
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water lter
7. Adjustable feet (4)
DETERGENT DISPENSER
Compartment 1: Pre-wash detergent
(powder)
Compartment 2: Washing detergent
(powder or liquid)
Compartment 3: Additives (fabric softeners,
etc.)
The fabric softener must not exceed the “MAX”
level.
! Use powder detergent for white cotton
garments, for pre-washing, and for washing at
temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
1
2
3
1.
3.
2.
5.
4.
6.
7.
21
5
3
9
4
7
8
6
For all testing institutes:
2) Long cotton cycle: set cycle 7 at a temperature of 40°C.
3) Long synthetics cycle: set cycle 8 at a temperature of 40°C.
* By selecting the cycle and excluding the spin cycle, the washing machine will drain only.
** The duration of the wash cycles can be checked on the display.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1) Test wash cycle in compliance with regulation 1061/2010:
This cycle is designed for normally soiled cotton loads and is the most ecient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C
or at 40°C. The actual washing temperature may dier from the indicated value.
Maximum load 7 kg
Power input in o mode 0.5 W / in left-on mode 8 W
Detergents and Addi-
tives
Recommended
detergent
Residual
dampness %
Energy con-
sumption kWh
Total water l
Wash cycle
Temperature
Maximum
spin
(r.p.m.)
Maximum
load (kg)
Duration
(minutes)
Pre-
wash
Wash
Fabric
softener
Powder Liquid
Default Range
1 2 3
1 Anti Stain 100 40 °C
- 40 °C 1200 7,0 **
–
– – – –
2 Anti Stain Quick 40 °C
- 40 °C 1200 3,5 **
–
–
– – –
3 White 60 °C
- 90 °C 1200 7,0 **
(90°)
– – – –
4 Bed Linen 60 °C
- 60 °C 1200 7,0 **
–
– – – –
5
Eco Cotton
(1)
60 °C
60° C 1200 7,0 270
–
53 0,82 52,5
40°C 1200 7,0 230
–
53 0,97 75
6 Mixed 40 °C
- 40 °C 1000 3,5 **
–
–
– – –
7 Cotton (2) 40 °C
- 60 °C 1200 7,0 230
–
– 53 0,97 75
8 Synthetics (3) 40 °C
- 60 °C 1200 4,0 195
–
– 33 0,75 72
9 Coloureds 40 °C
- 40 °C 1200 7,0 **
–
– – – –
10 Fast 30 min 30 °C
- 30 °C 800 3,0 30
–
–
71 0,19 29
11 Wool 40 °C
- 40 °C 800 1,5 **
–
–
– – –
12 Dark 30 °C
- 30 °C 800 4,0 **
–
–
– – –
13 Ultradelicates 30 °C
- 30 °C 0 1,0 **
–
–
– – –
14 Duvet 30 °C
- 30 °C 1000 2,0 **
–
–
– – –
Rinse + Spin – – 1200 7,0 **
–
–
– – – – –
Spin + Drain * – – 1200 7,0 **
–
– – – – – – –
Required dosage Optional dosage
Loading ...
Loading ...
Loading ...