Loading ...
Loading ...
Loading ...
8
INITIAL INSTALLATION
4. Loosen all four mounting bracket screws (X), then
completely remove the two mounting bracket screws
(X) from the round holes of canopy (E). Set aside for
later use.
Detach mounting bracket (D) from canopy (E).
5. Secure the mounting bracket (D) to the outlet box
using screws and washers provided with the outlet
box.
CAUTION: It is very important you use the proper
hardware when installing the mounting bracket (D) as
this will support the fan.
6. Remove all 10 preassembled motor screws (R) and ve
preassembed motor blocks from the underside of the
motor assembly (N). Discard the motor blocks but keep
the motor screws (R) for later.
For Standard or Angle Mounting Instructions, continue
to page 9. For Closemount Instructions, proceed to page
11.
E
X
D
4
6
Motor
Block
R
N
5
D
D
Standard or
Closemount
Mounting
Angled
Mounting
Loading ...
Loading ...
Loading ...