Loading ...
Loading ...
Loading ...
EN-14
Playing with Different Tones
Your Digital Piano comes equipped with three pedals:
damper, soft, and sostenuto.
Pedal Functions
z Damper Pedal
Pressing the damper pedal while playing will cause the
notes you play to reverberate for a long time.
• When a GRAND PIANO tone (CONCERT/
MODERN/CLASSIC/MELLOW/BRIGHT) is
selected as the tone, pressing this pedal will cause
notes to reverberate (with damper resonance) just
like the damper pedal on an acoustic grand piano.
Half-pedal operation (pressing the pedal part way)
is also supported.
z
Soft Pedal
Pressing this pedal while playing suppresses notes
played on the keyboard after the pedal was pressed,
and makes them sound softer.
z
Sostenuto Pedal
Only the notes of the keys that are depressed when this
pedal is pressed are sustained until the pedal is
released.
NOTE
• If pressing the pedal does not produce the desired
effect, it could mean that the pedal cord is not
connected properly. Refer to step 1 under “To
connect the pedal cord” (page EN-40).
Disabling Damper Noise Output
Damper noise is a slight metallic ringing sound that is
generated as the damper of an acoustic piano separates
from the wires pedal when the damper pedal is
pressed. The damper resonance of your Digital Piano
normally includes damper noise, but you can perform
the procedure below to disable its output.
1.
While holding down the FUNCTION button,
press the Damper Noise keyboard key (page
EN-28).
• Each press of the key toggles the setting and causes
the Digital Piano to beep as described below.
– Long beep: Damper noise output disabled
– Short beep: Damper noise output enabled
• See “Damper noise” on page EN-29 for more
information.
Using the Digital Piano’s
Pedals
Soft pedal
Damper pedal
Sostenuto pedal
AP260-ES-1A.indd 16 2014/06/26 14:18:47
Loading ...
Loading ...
Loading ...