Loading ...
Loading ...
Loading ...
11
Specifications
Model: SMART2200VS SMART2200VSXL SMART3000VS
Series #: AGSM2200MJR31 AGSM2200XMJR31 AGSM3000MJR31
Input
Nominal Voltage/Frequency: 120VAC/60 Hz 120VAC/60 Hz 120VAC/60 Hz
Recommended Dedicated Electrical Circuit: 20 amp or 15 amp* 20 amp 30 amp or 20 amp*
Output
Capacity (VA/Watts): 2200/1600 2200/1600 3000/2250
On Line Nominal Voltage/Waveform: 120VAC/sine wave 120VAC/sine wave 120VAC/sine wave
On Battery Nominal Voltage/Waveform: 115VAC/PWM sine wave 115VAC/PWM sine wave 115VAC/PWM sine wave
Battery Runtime (Half Load/Full Load) Minutes: 19/7 19/7+ 14/4+
Battery Recharge Time: 2 - 4 hrs. 2 - 4 hrs. 2 - 4 hrs.
FCC: Class A Class A Class A
Approvals: UL, cUL, NOM UL, cUL, NOM UL, cUL, NOM
ALL UNITS: Voltage-Regulated Output Voltage Range: -18% / +8%. On-Battery Output Voltage Range: ± 5 %. AC Surge
Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB at 1MHz); AC Protection Modes (H to
N, H to G, N to G).
+ Battery runtime can be extended with addition of optional Tripp Lite External Battery Packs (sold separately).
SMART2200VSXL and SMART3000VS models use BP48V18 battery packs. External batteries will increase both the battery
runtime and the battery recharge time.
* Since these models include two plug options, the amperage of the recommended circuit would change to match the
amperage of the plug. SMART2200VS models features a 20-amp NEMA 5-20P plug attached to its line cord, but includes a
15-amp NEMA 5-15P plug loose in the box that can be attached to the line cord by a qualified electrician. SMART3000VS
features a 30-amp twist-lock NEMA L5-30P plug attached to its line cord, but includes a 20-amp NEMA 5-20P plug loose in
the box that can be attached to the line cord by a qualified electrician.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been
assigned a unique series number. The series number can be found on the product nameplate label, along
with all required approval markings and information. When requesting compliance information for this
product, always refer to the series number. The series number should not be confused with the marking
name or model number of the product.
FCC RADIO/TV INTERFERENCE NOTICE: Note: This Equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual, may cause interference to radio communications. Operation of this
equipment is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense. The user must use shielded cables and connectors with this product. Any
changes or modifications to this product not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Note on Labeling
Two symbols are used on the label.
V~ : AC Voltage
V : DC Voltage
201112099 • 931874-EN
1111 W. 35th Street Chicago, IL 60609 USA
www.tripplite.com/support
201112099 931874.indb 11 12/28/2011 4:44:11 PM
Loading ...
Loading ...
Loading ...