Loading ...
Loading ...
Loading ...
English
11
TROUBLESHOOTING
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS
AND/OR ELECTRICAL SHOCK, TURN POWER SWITCH OFF
AND DISCONNECT GROUNDED PLUG FROM ELECTRICAL
OUTLET BEFORE PERFORMING TROUBLESHOOTING
CHECKS.
WARNING!
Minor problems often can be fixed without calling customer service.
PROBLEM SOLUTION
Motor does not run
Check power cord, plugs and outlet.
Ensure the on/off switch is in the ON
position (
)
Suction capacity
decreases
Remove blockages in the suction nozzle,
suction tube, suction hose or filters.
Replace the paper or fleece bag.
Check for proper installation of the filters.
Clean or replace the filters.
Empty canister, refer to Emptythe tank
under Operating instructions.
PROBLEM SOLUTION
Vacuum stops running
Thermal overload has been tripped:
1. Turn the vacuum off and disconnect
vacuum cleaner from power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an appropriate
outlet and turn on/off switch to the ON
position (
) to test. If vacuum will not
restart call 1-888-899-0146
Dust comes out while
vacuuming
Check for proper installation of the filters.
Ensure filters are not damaged; replace if
necessary.
Ensure filter seals are in place and are
secure.
Loading ...
Loading ...
Loading ...