Loading ...
Loading ...
Loading ...
MultiLine Font
Specifies the display font size when LineI/LineO or LineI/DecimalO is
selected for Input/Output. Up to four lines can be displayed while Normal
Font is selected, and up to six lines can be displayed with Small Font.
To specify this: Perform this key operation:
Use normal font
(SETUP) (MultiLine Font)
(Normal Font)◆
Use small font
(SETUP) (MultiLine Font)
(Small Font)
Initializing the Calculation Mode and Other
Settings
Performing the following procedure initializes the calculation mode and
other setup settings as shown below. (except the Contrast setting)
(RESET) (Setup Data) (Yes)
This setting: Is initialized to this:
Calculation Mode Calculate
Input/Output MathI/MathO
Angle Unit Degree
Number Format Norm 1
Fraction Result d/c
Statistics Off
Table
f(x),g(x)
Recurring Dec On
Decimal Mark Dot
Digit Separator Off
MultiLine Font Normal Font
• To cancel initialization without doing anything, press (Cancel) instead
of .
16
Loading ...
Loading ...
Loading ...