Audio/Video
SRP6220R/27
1. Power – Turns TV ON/OFF
2. Setup – Used to program the remote
3. Up/down/left/right menu navigation
4. OK – Selects menu items
5. Back – Returns to previous menu/screen
6. Home – Returns to the home screen to
access streaming features
7. Options (*) - Displays additional options
8. Rewind, play/pause, fast forward
9. Volume up/down
10. Channel up/down
11. Mute – Mutes sound
12. App – Access top apps like Netix,
Amazon Prime, Hulu and more
13. Instant replay – Repeats previous few
seconds, then resumes play
Button Functions
Setup
Remote does not operate your device
• Make sure the batteries are fresh and
installed correctly.
• Aim the remote directly at your device and
make sure there are no obstructions
between the remote and the device.
• Remote may not be compatible with
your device.
Troubleshooting
1. Press and hold SETUP until the red light
stays on.
2. Press the REWIND button 4 times. The red
light will blink twice.
Reset to Factory Settings
Thank you
for your purchase!
Like our product?
Leave a review on your favorite
retailer website or amazon.com
Having problems?
Let us know how we can help.
Call 1-844-816-0320 between
7AM-8PM, M-F, Central Time.
Scan to watch a step-by-step instructional
video or visit byjasco.com/54463i
Get exclusive, web-only deals and more!
Scan here or visit byjasco.com/deals
Product
instructions
made easy
For additional Philips
remote controls, visit
our website!
byjasco.com/remotes
Need more
remote control
devices?
Roku
®
TV
replacement
remote
This product and its sellers are not aliated
with Roku
®
. There is no endorsement or
sponsorship by non-aliated brands
provided or implied. All brand names and
products listed/shown are trademarks of
their respective owners.
See reverse for easy-to-follow
instructions and exclusive deals.
Register
your Philips
product
MADE IN CHINA
The Philips trademark and the Philips
Shield Emblem are registered trademarks
of Koninklijke Philips N.V. used under
license. This product has been
manufactured and is sold under the
responsibility of Jasco Products Company,
and Jasco Products Company LLC, 10 E.
Memorial Rd., Oklahoma City, OK 73114 is
the warrantor in relation to this product.
This product comes with a 90-day
warranty. Visit www.philips.com/support for
warranty details.
Questions? Contact our U.S.-based
Consumer Care at 1-844-816-0320
between 7AM–8PM, M–F, Central Time.
Preprogrammed for immediate use with
Roku-enabled TVs*. Simply insert two (2) AA
batteries (not included) and you’re ready to enjoy
your favorite shows. Alkaline batteries are
recommended for this remote.
*Insignia and Sharp Roku-enabled TVs may need
additional programming. See Programming
section for instructions.
Battery Installation
1. Press and slide battery cover downward
to remove.
2. Insert the batteries making sure to match
the (+) (-) polarity inside the compartment.
3. Slide battery cover back into place.
Note: If your remote is not operating properly,
replace the batteries with new ones.
Battery Precautions
• Do not mix old and new batteries.
• Do not mix alkaline, standard
(carbon-zinc) or rechargeable
(Ni-Cd, Ni-MH, etc.) batteries.
• Always remove old, weak or worn-out
batteries promptly and recycle or dispose of
them in accordance with local and national
regulations.
Battery Saver
Your remote automatically turns o if the
buttons are held down for more than 8
seconds. This saves battery life if your
remote gets stuck in a place where the
buttons remain depressed (e.g., between
sofa cushions).
Code Saver
You have up to 10 minutes to change the
batteries in your remote without losing the
codes you have programmed.
8
2
7
10
6
13
12
4
1
5
9
11
3
Some Insignia and Sharp models may need
additional programming. Use the included
Code List and follow the steps below.
1. In the Code List (included with remote),
circle the 4-digit codes for the type and
brand of device you wish to control.
2. Press and hold down SETUP until the
remote's red light turns on.
3. Use the number buttons indicated in the
diagram above to enter the rst 4-digit
code circled in Step 1. The red light will then
turn o.
4. Point the remote at the device and test
the buttons. If they don’t work as
expected, repeat Steps 2-4 with the next
circled code.
Programming notes
• Some codes may operate only a few
device functions, so test other codes
for more functionality.
• Trouble nding a code? Program
the remote using the auto code
search method.
• Keep your device codes for
future reference.
Programming Insignia
and Sharp Roku
®
TVs
3
1
5
3
6 7 8
9 0
2 4
2
Loading ...
Loading ...
Loading ...
