Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
TO CHANGE TEHPERATURE SETTING:
f temp/timer auto [] 1
!0
V ON-OFF A FAN SPEED
_ PRESS _ TO RAISE
l "PRESS V TO LOWER
fitter
reset
steep
YOU WILL SEE:
temp/tirner
auto [] ]
c _ me_ fitter
lo reset
V 0N-0FF A FAN SPEED steep
Note: Tap or hold either up ( A ) or down ( V ) button until
the desired temperature is seen on the display. This tempe-
rature will be automatically maintained anywhere between
16 °C (60 °F) and 32 °C (90 °F). If you want the display to
read the actual room temperature. See "To Operate on Fan
Only" section on Page 7.
TO AD3UST FAN SPEEDS:
temp/timer
V 0N-0FF
auto [] 1
c _ mh_ fitter
!o reset
A FAN SPEED steep
\
DO THIS:
YOU WILL SEE:
temp/timer
auto 1
c _ m_ fitter
lo [] reset
V 0N-0FF A FAN SPEED steep
PRESS TO SELECT
TO USE AUTO FAN FEATURE:
temp/timer C _ mh_aut°lo[] ]
filter
reset
V 0N-0FF A FAN SPEED steep
YOU WILL SEE:
temp/dmer
auto [] 1
c _m2_ fitter
_o reset
V 0N-0FF A FAN SPEED steep
DO THIS:
PRESS FAN BUTTON,
CHOOSE AUTO
Note: Fan starts at High Speed and adjusts to a slower
speeds the room temperature dictates. For example, if the
room doesn't get too warm, it will stay at the slowest speed,
If the room temperature rises quickly, such as a door being
opened, it will automatically go to the highest speed. The fan
speeds will re-adjust back to the slowest speed as the room
returns to the original set temperature. Press either the fan
slower or fan faster button to adjust the fan speed manually.
6
Loading ...
Loading ...
Loading ...