Loading ...
Loading ...
Loading ...
5
To Reset the UPS to No External Battery Packs
To Uninstall the PowerAlert External Battery Pack Utility
1. Connect a USB cable or serial cable between the UPS and your PC.
Note: If the UPS supports both USB and serial communication, connect only one communication cable between the UPS and PC.
2. If the PowerAlert service is running, stop it.
3. Unzip the External Battery Pack Utility setup program from the zipped file.
4. Run the paebpu-12.6.64.xxxxx-win_x86.exe installation file.
5. To launch the application, go to directory: C:\Program Files (x86)\TrippLite\PowerAlert External Battery Pack Utility and double-click the
paebpu.exe file.
6. Use the bundled file located in the PowerAlert External Battery Pack Utility directory. The Download Using HTTP option is inoperable at
this time.
7. Click Next.
8. The application will attempt to either download the battery pack list or open a window to select the included battery pack file.
9. To initiate a discovery of an appropriate UPS, click Next. If no UPS is discovered, the application will indicate that after discovery is
complete.
10.
Click Next.
11. Click Use Internal Batteries Only.
12. Click Next.
13.
The application will update the UPS with the new battery pack information.
14. To close the application, click Done.
1. Go to Add/Remove Programs in Control Panel.
2. Select PowerAlert External Battery Utility.
3. Click Remove or Uninstall.
18-05-182-93350A-EN.indd 5 5/24/2018 1:11:44 PM
Loading ...