Loading ...
Loading ...
Loading ...
© IMPEX INC. www.impex-fitness.com 8
STEP-2
A.) NOTE: Extra help may be needed to hold the Front Post (#4) while connecting the cables
and wires.
B.) Remove the M5 x 1 ¾” Tension Kobe Screw (#18) and Ø ½” Flat Washer (#19) from Tension
Knob (#55).
C.) Insert the Upper Tension Cable on Tension Knob (#55) through the opening on Front Post (#9),
and drop the Upper Tension Cable all the way down to bottom of Front Post.
D.) Plug the Tension Knob into the opening and secure it with M5 x 1 ¾” Tension Kobe Screw (#18)
and Ø ½” Flat Washer (#19).
E.) Attach the Front Post (#9) to the Main Frame (#1). Connect the Middle Computer Wire (#51) from
the bottom of the Front Post to the Lower Computer Wire (#50) from the Main Frame.
F.) Pull the tension connector from the Upper Tension Cable (#55) and slide in between the opening
on the connector on the Lower Tension Cable (#46). Pull the Upper Tension Cable upward and
slide the wire through the slot on the bracket.
G.) Drop down the Upper Tension Cable so the fitting sits firmly on top of the bracket.
H.) Secure the Front Post to the Main Frame with four M8 x 5/8” Allen Bolts (#47) and four Ø 5/8”
Curved Washers (#5).
Loading ...
Loading ...
Loading ...